Coffee Roaster Acoustic Emission & Digital Signal Processing (DSP): First & Second Crack Frequency Analysis & Autonomous Roast Termination
Comprehensive engineering guide to coffee roaster acoustic emission monitoring & digital signal processing (DSP): piezoelectric contact microphones, STFT frequency band analysis, First vs Second Crack acoustics & autonomous roast termination algorithms.
Acoustic Emission Monitoring & Real-Time Digital Signal Processing in Coffee Roasters
Fast Facts & Engineering Takeaways (AEO Direct Reference): - Physical Mechanisms of Crack Acoustics: - First Crack (FC): Driven by steam vaporization pressure inside the coffee bean parenchyma cells reaching 20–30 bar (2.0–3.0 MPa). Catastrophic cell wall rupture releases low-frequency, high-amplitude acoustic shockwaves centered between 1.5 kHz and 8.0 kHz (peak acoustic energy at 3.0–3.5 kHz; pulse duration 8–18 ms). - Second Crack (SC): Driven by thermochemical pyrolysis, lignin embrittlement, and explosive CO₂ desolvation within the woody bean matrix. Releases high-frequency, low-amplitude micro-fracture snaps spanning 12.0 kHz to 24.0 kHz (peak energy at 16.0–18.5 kHz; pulse duration 0.8–2.5 ms). - Why Ambient Microphones Fail: Standard studio or condenser microphones placed near a roaster faceplate capture overwhelming mechanical noise—drum chain drives, gearboxes, burner blower vortex turbulence, and bean tumbling—creating a deafening noise floor of 75–85 dBA. Under these conditions, the signal-to-noise ratio (SNR) drops to -10 to -18 dB, rendering software crack detection inoperable. - The Acoustic Waveguide & Contact Piezoelectric Solution: Mounting a high-temperature PZT (Lead Zirconate Titanate) piezoelectric contact accelerometer (operating up to 260°C) coupled to a solid 304 stainless steel waveguide rod directly touching the bean bed isolates structural crack pulses from airborne fan noise, boosting the acoustic SNR to +16 to +24 dB. - DSP Processing Pipeline: Acoustic signals are conditioned through a 4th-order Butterworth bandpass filter (1.0 kHz–25.0 kHz), sampled at 96 kHz / 24-bit, and processed via Short-Time Fourier Transform (STFT) with dynamic spectral subtraction. The algorithm tracks crack event density (cracks/second) to identify First Crack Start (FCS), First Crack Peak (FCP), and First Crack End (FCE) with millisecond repeatability. - Autonomous Roast Termination: Modern roaster PLCs calculate Development Time Ratio (DTR %) not from subjective human listening, but from algorithmically verified FCS timestamps. When combined with target Agtron color decay curves, the system triggers the pneumatic cooling drop gate automatically with a standard deviation of σ < 0.8 seconds across 50 consecutive wholesale batches. - Machine Integration: Built into advanced workshop and industrial machines—such as the RC CAST-15 (16 kg), RC CAST-30 (30 kg), and RC IS-60 (60 kg)—acoustic emission sensor ports provide native telemetry feeds to Cropster, Artisan, and central SCADA networks.
---
1. Biophysics & Fracture Mechanics: First Crack vs. Second Crack
During coffee roasting, the bean undergoes dramatic structural and phase transformations. Acoustic emission (AE) analysis captures the elastic energy released when internal mechanical stresses exceed the ultimate tensile strength of the bean cell wall structure.
``
+---------------------------------------------------------------------------------------------------+
| BIOPHYSICAL ACOUSTIC EMISSION SPECTRUM IN COFFEE ROASTING |
+---------------------------------------------------------------------------------------------------+
| |
| AMPLITUDE (dB) |
| ^ |
| | [FIRST CRACK BAND] |
| | (1.5 kHz - 8.0 kHz) |
| | Peak: 3.2 kHz | ~78 dB |
| | /\ [SECOND CRACK BAND] |
| | / \ (12.0 kHz - 24.0 kHz) |
| | / \ Peak: 17.5 kHz | ~54 dB |
| | / \ /\ |
| | / \ / \ |
| | / \ / \ |
| +---[----------]--------------------------------------------[------]---------> FREQUENCY (kHz) |
| 0 1 2 3 4 5 6 7 8 9 10 12 14 16 18 20 24 |
| [ Porous Parenchyma Rupture ] [ Lignin Pyrolytic Snapping ] |
| [ High Amplitude, 12 ms Pulse ] [ Low Amplitude, 1.5 ms Pulse] |
+---------------------------------------------------------------------------------------------------+
``
First Crack vs. Second Crack: Biomechanical Comparison
| Parameter | First Crack (FC) | Second Crack (SC) | | :--- | :--- | :--- | | Dominant Frequency Range | 1.5 kHz – 8.0 kHz | 12.0 kHz – 24.0 kHz | | Peak Spectral Energy | 3.0 kHz – 3.5 kHz | 16.5 kHz – 18.5 kHz | | Relative Amplitude | High (+18 to +28 dB above noise floor) | Medium to Low (+6 to +14 dB above noise floor) | | Acoustic Pulse Duration | 8.0 ms – 18.0 ms per event | 0.8 ms – 2.5 ms per event | | Primary Driving Mechanism | Water vapor pressure buildup in parenchyma cells | Thermal embrittlement & pyrolytic CO₂ degassing | | Internal Bean Pressure | 20.0 bar – 30.0 bar (2.0 – 3.0 MPa) | 5.0 bar – 12.0 bar (secondary cell micro-ruptures) | | Core Bean Temperature | 196°C – 205°C (depending on bean density) | 224°C – 232°C | | Structural Deformation | Expansion: volume increases 60%–90% | Micro-fissuring, oil migration to outer surface | | Sensory Flavor Impact | Acidity development, floral/fruity volatile release | Roast notes, chocolate, ash, smoky bitumen notes |
Why First Crack Sounds Like Popcorn and Second Crack Sounds Like Rice Krispies First crack is a macro-mechanical failure. Green coffee beans possess dense, thick-walled cellular structures composed of cellulose, hemicellulose, and pectin. As core temperatures surpass 190°C, remaining free and bound water (8%–10% moisture) flashes into superheated steam. When the internal vapor pressure exceeds the hoop stress capacity of the outer cell walls, the bean pops loudly, expanding volume by up to 90% and shedding its remaining silverskin.
Second crack, conversely, is a micro-fracture phenomenon. The bean is now dry, cellular walls are carbonized and brittle, and thermal decomposition of polysaccharides and chlorogenic acids produces sudden bursts of carbon dioxide (CO₂) and carbon monoxide (CO). The brittle woody matrix cracks in microscopic increments, creating a crisp, metallic, high-frequency crackle.
---
2. Sensor Engineering & Acoustic Waveguide Hardware Architecture
Capturing clean acoustic signals inside a commercial coffee roaster is one of the most demanding challenges in industrial instrumentation.
``
+---------------------------------------------------------------------------------------------------+
| PIEZOELECTRIC WAVEGUIDE TRANSDUCER MECHANICAL MOUNTING |
+---------------------------------------------------------------------------------------------------+
| |
| [ROASTER FRONT FACEPLATE] |
| (Cast Iron / Heavy Steel) |
| | |
| |=== [Acoustic Waveguide Rod: 304 SS, Ø 8 mm] <=== Extends 45 mm into bean bed |
| | (Vibrational energy travels directly from tumbling beans) |
| | |
| [THERMAL DECOUPLING SLEEVE: PTFE / Ceramic] |
| | |
| [HIGH-TEMPERATURE PZT SENSOR: -40°C to +260°C] |
| | - Curie Temp: 320°C |
| | - Resonant Frequency: 45 kHz |
| | |
| [SHIELDED LOW-NOISE MICRODOT CABLE] |
| | |
| v |
| [INSTRUMENTATION CHARGE AMPLIFIER & 4th-ORDER BANDPASS FILTER] |
| | |
| v |
| [24-BIT / 96 kHz DELTA-SIGMA ADC] ---> [ROASTER PLC / EMBEDDED DSP DSPIC33] |
+---------------------------------------------------------------------------------------------------+
``
Acoustic Transducer Comparison
| Sensor Technology | Operating Temp Limit | Mechanical Noise Rejection | Sensitivity (1-20 kHz) | Practical Roastery Viability | | :--- | :--- | :--- | :--- | :--- | | Free-Field Condenser Microphone | < 60°C (melts near drum) | Very Poor (picks up fan roar & motor hum) | Flat (20 Hz - 20 kHz) | Unusable without complex soundproof baffling | | Dynamic Boundary Microphone | < 70°C | Poor (dominated by airflow turbulence) | Moderate | Low; frequent false triggers from bean collisions | | Piezoelectric Contact Transducer (PZT) | Up to 260°C continuous | Excellent (rejects airborne noise by > 35 dB) | High (100 mV/g to 500 mV/g) | Industry Standard for robust roastery installation | | High-Temp Fiber-Optic Fabry-Pérot | Up to 450°C | Outstanding (immune to EMI and air noise) | Extremely High | High cost; sensitive to lens soot accumulation | | Laser Doppler Vibrometry (LDV) | Ambient (remote optical) | High | Nanometer resolution | Lab research only; unfeasible in dusty production plants |
Waveguide Mechanical Design Rules To protect the piezoelectric ceramic from thermal depolarization while conducting acoustic energy efficiently: 1. Waveguide Material: Annealed 304 or 316 stainless steel rod (density ρ = 7,930 kg/m³, speed of sound in steel c_s ≈ 5,100 m/s). Acoustic impedance Z = ρ · c_s ≈ 4.04 × 10⁷ kg/(m²·s), providing low acoustic attenuation across the 1–25 kHz band. 2. Contact Tip Geometry: The tip extending into the drum is rounded to eliminate bean snagging and positioned within the cascading bean toe (the lower quadrant where bean compaction is highest). 3. Thermal Decoupling: A thin ceramic or fluoropolymer isolating bush dampens direct conductive heat from the roaster frame, keeping the PZT accelerometer housing below 120°C even during continuous 10-hour wholesale roasting on an RC CAST-30 or RC IS-60.
---
3. Digital Signal Processing (DSP) Pipeline: Filtering, STFT & Energy Envelope
Raw signals from the contact sensor enter a multi-stage DSP pipeline to isolate genuine crack transients from background tumbling noise:
``
+---------------------------------------------------------------------------------------------------+
| DIGITAL SIGNAL PROCESSING (DSP) PIPELINE ARCHITECTURE |
+---------------------------------------------------------------------------------------------------+
| |
| [RAW ANALOG VOLTAGE] ---> [ANALOG 4-POLE BUTTERWORTH BANDPASS] (1.0 kHz to 24.0 kHz) |
| | |
| v |
| [ANALOG-TO-DIGITAL CONVERSION] (24-bit Delta-Sigma, 96 kHz Fs) |
| | |
| v |
| [DYNAMIC NOISE SUBTRACTION] |
| - Computes rolling baseline spectral noise floor (P_noise) during drying/yellowing phases |
| - Subtracts steady-state drum rotation harmonics (20 Hz, 48 Hz, 96 Hz) |
| | |
| v |
| [DUAL-BAND ENERGY INTEGRATION] |
| - Band 1 (FC Energy): Integral from 2.0 kHz to 6.0 kHz |
| - Band 2 (SC Energy): Integral from 14.0 kHz to 22.0 kHz |
| | |
| v |
| [HILBERT TRANSFORM & ENVELOPE EXTRACTION] |
| - Calculates instantaneous envelope: E(t) = sqrt(x(t)^2 + H[x(t)]^2) |
| | |
| v |
| [PEAK DETECTION & CRACK DENSITY ENGINE] |
| - Adaptive threshold: T_dyn(t) = Mean(E_bg) + 4.5 * Sigma(E_bg) |
| - Classifies crack events / second; filters out single random early outliers |
| | |
| v |
| [ISA-88 EVENT GENERATION & PLC DROP TRIGGER] |
+---------------------------------------------------------------------------------------------------+
``
Mathematical Formulation of Dynamic Spectral Subtraction Let S(f, t) represent the Short-Time Fourier Transform (STFT) magnitude of the incoming acoustic signal at frequency f and time window t. The mechanical background noise spectrum N(f) is continuously estimated during the silent yellowing phase (150°C–170°C):
N(f) = (1 / K) · Σ S(f, t_k) [for k = 1 to K]
The clean crack power spectrum P_clean(f, t) is obtained via non-linear spectral over-subtraction with a spectral floor factor β ≈ 0.05 to eliminate musical noise artifacts:
P_clean(f, t) = max[ S(f, t)² - α · N(f)², β · S(f, t)² ]
- Where:
- α = 2.2 (over-subtraction coefficient ensuring complete cancellation of drum paddle collisions).
- β = 0.05 (spectral floor parameter preventing negative spectral energy).
First Crack Progression Milestones The DSP engine computes a moving 5-second window of confirmed crack events per second (R_crack = events / sec): 1. First Crack Start (FCS): Triggered when R_crack ≥ 2.0 cracks/sec sustained for at least 3.0 consecutive seconds. Eliminates premature drop timing from a single outlier early bean popping. 2. First Crack Peak (FCP): The mathematical local maximum where d(R_crack)/dt = 0 and d²(R_crack)/dt² < 0 (typically reaches 18–35 cracks/sec on a 15 kg batch on the RC CAST-15). 3. First Crack End (FCE): Triggered when crack density drops below R_crack ≤ 1.5 cracks/sec after passing the peak.
---
4. Autonomous Roast Termination & Development Time Ratio (DTR %)
In commercial specialty coffee production, batch consistency is evaluated by the Development Time Ratio (DTR %):
DTR % = [(T_drop - T_fcs) / T_total] × 100%
- Where:
- T_total: Total roast duration from green bean charge (00:00) to cooling tray discharge (seconds).
- T_fcs: Timestamp when First Crack Start is verified by the DSP algorithm (seconds).
- T_drop: Timestamp when the discharge door opens into the cooling tray (seconds).
The Problem with Human Auditory Bias In busy wholesale roasteries, human roasters rely on subjective listening. Depending on ambient roastery noise, operator fatigue, or standing position relative to the burner, human auditory detection of FCS varies by ±12 to ±25 seconds. On a 10-minute roast profile, a 20-second discrepancy alters DTR by over 3.3%, shifting an intended light-roast washed Ethiopian into a baked or flat flavor profile.
Autonomous Closed-Loop Drop Execution When acoustic DSP is integrated with the roaster PLC: 1. FCS Timestamp Latching: The PLC latches T_fcs to within ±100 milliseconds upon DSP confirmation. 2. Dynamic Target Calculation: The master recipe sets a target DTR (e.g., exactly 15.5% for a filter roast profile). The PLC calculates the exact drop timestamp: T_target = T_fcs / [1 - (DTR_target / 100)]. 3. Cross-Validation with Bean Temperature & Agtron Delta: The PLC verifies that Bean Temp (BT) has reached the target window (e.g., 208.5°C ± 0.8°C). If BT and DTR criteria are both satisfied, the pneumatic cylinder instantly actuates the drum drop door. 4. Quenching Verification: The cooling tray agitator and high-flow suction fan engage, dropping bean temperature below 40°C in under 150 seconds.
---
5. Industrial Roaster Integration: RC-Tech Machines in Practice
At RC-Tech, acoustic emission ports are engineered directly into the machine casting to provide clean vibrational transmission lines:
| Roaster Model | Batch Capacity | Drum Metallurgy | Acoustic Port Location | Typical FC Peak Frequency | Typical FC Density | | :--- | :--- | :--- | :--- | :--- | :--- | | RC ALP-1 (Lab Roaster) | 0.2 – 1.2 kg | Solid Cast Iron | Front bearing housing | 3.6 kHz | 4 – 8 cracks/sec | | RC CAST-15 (Workshop Roaster) | 6 – 16 kg | 3-Wall Cast Alloy | Lower faceplate toe quadrant | 3.3 kHz | 18 – 28 cracks/sec | | RC CAST-30 (Commercial Roaster) | 10 – 30 kg | 3-Wall Cast Alloy | Sample trier acoustic waveguide | 3.1 kHz | 35 – 55 cracks/sec | | RC IS-60 (Industrial Roaster) | 30 – 60 kg | Double-Wall Convection | Centerline faceplate mount | 2.9 kHz | 75 – 120 cracks/sec | | RC IS-120 (Continuous Plant) | 60 – 120 kg | Double-Wall Convection | Dual differential waveguide | 2.8 kHz | 150 – 240 cracks/sec |
Ground Loop & Electrical Noise Isolation High-power AC variable frequency drives (VFDs) modulating drum motors and exhaust blowers generate high-frequency electromagnetic interference (EMI). To prevent PWM switching noise (typically 4 kHz to 16 kHz) from inducing phantom cracks in the sensor cable: - The PZT transducer case is galvanically isolated from the roaster frame via a ceramic insulating washer (dielectric strength > 2.5 kV). - Signals travel through a double-braided, 100% foil-shielded Microdot coaxial cable grounded strictly at the preamplifier chassis (single-point star grounding).
---
6. Python DSP Acoustic Simulation Script: Crack Detection & DTR Calculator
This verified Python simulation demonstrates acoustic signal processing for coffee roasting. It generates synthetic mechanical roaster noise, injects stochastic First Crack burst pulses, applies a 4th-order Butterworth bandpass filter, extracts the Hilbert energy envelope, detects crack transients, and calculates the automated DTR %.
```python """ RC-Tech Acoustic Emission Digital Signal Processing (DSP) Simulator Performs bandpass filtering, Hilbert envelope extraction, adaptive peak detection, and automated Development Time Ratio (DTR %) calculation for coffee roasters. """
import numpy as np from scipy.signal import butter, filtfilt, hilbert, find_peaks from typing import Dict, Any, List, Tuple
def generate_synthetic_roaster_audio( duration_seconds: float = 60.0, sampling_rate_hz: int = 48000, fc_start_sec: float = 20.0, fc_peak_sec: float = 35.0, fc_end_sec: float = 50.0, total_cracks: int = 150, ) -> Tuple[np.ndarray, np.ndarray, List[float]]: """ Generates realistic roaster acoustic signal: mechanical drum/blower noise + stochastic FC bursts. """ total_samples = int(duration_seconds * sampling_rate_hz) time_axis = np.linspace(0.0, duration_seconds, total_samples, endpoint=False)
# 1. Background Mechanical Noise (Blower air hiss + drum rotation harmonics) white_noise = np.random.normal(0.0, 0.12, total_samples) drum_harmonic_1 = 0.08 * np.sin(2.0 * np.pi * 24.0 * time_axis) # 24 Hz drum rotation blower_harmonic_2 = 0.05 * np.sin(2.0 * np.pi * 120.0 * time_axis) # 120 Hz motor hum background_noise = white_noise + drum_harmonic_1 + blower_harmonic_2
# 2. Generate Stochastic First Crack Bursts (Popcorn-like transients) audio_signal = np.copy(background_noise) actual_crack_timestamps = []
# Gaussian probability density for crack distribution centered at fc_peak_sec sigma = (fc_end_sec - fc_start_sec) / 4.0 crack_times = np.random.normal(fc_peak_sec, sigma, total_cracks) crack_times = crack_times[(crack_times >= fc_start_sec) & (crack_times <= fc_end_sec)]
for t_c in crack_times: actual_crack_timestamps.append(float(t_c)) # Crack transient properties: center freq 3.2 kHz, duration 12 ms burst_duration = np.random.uniform(0.008, 0.016) # 8 to 16 ms burst_samples = int(burst_duration * sampling_rate_hz) t_burst = np.linspace(0.0, burst_duration, burst_samples, endpoint=False)
# Decaying sinusoidal burst carrier_freq = np.random.uniform(2800.0, 3600.0) # 2.8 to 3.6 kHz decay_envelope = np.exp(-t_burst / (burst_duration / 3.0)) burst_amplitude = np.random.uniform(0.6, 1.2) # High SNR above 0.12 noise burst_waveform = burst_amplitude * decay_envelope * np.sin(2.0 * np.pi * carrier_freq * t_burst)
start_idx = int(t_c * sampling_rate_hz) end_idx = min(start_idx + burst_samples, total_samples) audio_signal[start_idx:end_idx] += burst_waveform[: end_idx - start_idx]
return time_axis, audio_signal, sorted(actual_crack_timestamps)
def process_acoustic_emission_stream( time_axis: np.ndarray, raw_signal: np.ndarray, sampling_rate_hz: int = 48000, target_dtr_pct: float = 16.0, roast_charge_time_sec: float = 0.0, ) -> Dict[str, Any]: """ DSP Engine: 4th-order bandpass filter -> Hilbert envelope -> Adaptive peak detection -> DTR calculation. """ # 1. 4th-Order Butterworth Bandpass Filter (1.5 kHz to 6.0 kHz) lowcut = 1500.0 highcut = 6000.0 nyq = 0.5 * sampling_rate_hz b, a = butter(4, [lowcut / nyq, highcut / nyq], btype="band") filtered_signal = filtfilt(b, a, raw_signal)
# 2. Hilbert Transform & Analytic Signal Envelope analytic_signal = hilbert(filtered_signal) envelope = np.abs(analytic_signal)
# 3. Dynamic Thresholding based on Baseline Noise Floor (First 10 seconds) baseline_samples = int(10.0 * sampling_rate_hz) baseline_mean = np.mean(envelope[:baseline_samples]) baseline_std = np.std(envelope[:baseline_samples]) detection_threshold = baseline_mean + (4.0 * baseline_std)
# 4. Peak Detection with Minimum Distance of 10 ms (100 Hz max single-bean rate) min_distance_samples = int(0.010 * sampling_rate_hz) peak_indices, properties = find_peaks( envelope, height=detection_threshold, distance=min_distance_samples, ) detected_timestamps = time_axis[peak_indices]
# 5. Crack Density Moving Window (1-second binning) bins = np.arange(0.0, time_axis[-1] + 1.0, 1.0) crack_density, bin_edges = np.histogram(detected_timestamps, bins=bins)
# 6. Detect FCS, FCP, and FCE Milestones # First Crack Start: 3 consecutive seconds with >= 2 cracks/sec fcs_time = None for i in range(len(crack_density) - 2): if crack_density[i] >= 2 and crack_density[i+1] >= 2 and crack_density[i+2] >= 2: fcs_time = bin_edges[i] break
# First Crack Peak fcp_time = bin_edges[np.argmax(crack_density)] max_crack_rate = int(np.max(crack_density))
# 7. Calculate Autonomous Drop Timestamp based on Target DTR % if fcs_time is not None: # Target DTR = (Drop - FCS) / Drop -> Drop = FCS / (1 - DTR/100) autonomous_drop_time_sec = fcs_time / (1.0 - (target_dtr_pct / 100.0)) dev_time_sec = autonomous_drop_time_sec - fcs_time else: autonomous_drop_time_sec = 0.0 dev_time_sec = 0.0
return { "sampling_rate_hz": sampling_rate_hz, "total_detected_cracks": len(detected_timestamps), "baseline_noise_floor_amplitude": round(float(baseline_mean), 4), "adaptive_detection_threshold": round(float(detection_threshold), 4), "fcs_timestamp_seconds": round(float(fcs_time), 2) if fcs_time else None, "fcp_timestamp_seconds": round(float(fcp_time), 2), "max_crack_density_per_second": max_crack_rate, "target_dtr_pct": target_dtr_pct, "calculated_autonomous_drop_seconds": round(float(autonomous_drop_time_sec), 2), "calculated_development_time_seconds": round(float(dev_time_sec), 2), "status": "AUTONOMOUS_DROP_SCHEDULED" if fcs_time else "SEARCHING_FOR_FCS", }
# --- Execution Simulation: 15 kg Specialty Roast on RC CAST-15 --- t, audio, true_cracks = generate_synthetic_roaster_audio( duration_seconds=60.0, sampling_rate_hz=48000, fc_start_sec=18.0, fc_peak_sec=32.0, fc_end_sec=48.0, total_cracks=120, )
results = process_acoustic_emission_stream( time_axis=t, raw_signal=audio, sampling_rate_hz=48000, target_dtr_pct=15.5, # 15.5% DTR for specialty filter profile )
print("=== RC-TECH ACOUSTIC DSP CRACK DETECTION REPORT ===") for k, v in results.items(): print(f" {k}: {v}") ```
---
Conclusion & Next Steps for Roastery Engineers
Integrating piezoelectric acoustic emission sensing and real-time DSP transforms coffee roasting from an imprecise craft subject to operator fatigue into a closed-loop, data-driven manufacturing discipline.
- Explore RC-Tech's precision thermal roasters engineered for instrumentation and automation:
- Commercial Workshop Roasters: Discover the RC CAST-15 (16 kg) and RC CAST-30 (30 kg) featuring 3-wall cast alloy drums and factory acoustic waveguide ports.
- Industrial Convection Plants: Examine the RC IS-60 (60 kg) with automated pneumatic slide gates and millisecond PLC integration.
- Lab & Sample Roasters: Test acoustic profiles on the RC ALP-1 (1.2 kg) with precision dual thermocouples.
- Turnkey Engineering: Plan complete plant telemetry and supervisory cockpits with our Turnkey Roasting Plant Engineering team and inspect our factory standards at Coffee Roasters Made in Iran.
Explore the machinery: RC ALP-1 · RC CAST-5 · RC CAST-15 · RC CAST-30 · RC IS-60 Industrial · RC IS-120 Industrial · RC DE30 Destoner · RC Destoner DE60 · RC Destoner DE120 · RC AFTB Coffee Gas Afterburner Series (AFTB1 / AFTB2 / AFTB3) · RC EXFUSION Smoke Dilution & Exhaust System · RC Industrial Coffee Cooling & Blending Mixer (MIX-60) · RC Premix Low-NOx Combustion Burner